2.3.1. Setting Focus

Of all the windows on your screen, only one window receives the keystrokes you type. This window is usually highlighted in some way. For instance, the titlebar of the window that receives your input may be blue instead of the default grey color. In X jargon, choosing the window you type to is called "setting the input focus." Most window managers can be configured to set the focus in one of the following ways:

• Move the mouse pointer into a window and click a mouse button (usually the first button; see Section 2.4, later in this chapter). In some systems, you may need to click on the titlebar at the top of the window.

• Simply move the pointer inside a window.

Your window manager may be configured to give the input focus automatically to any new windows that pop up.

2.3.2. Terminal Windows

One of the most important windows is a terminal window. A terminal window has a Unix session inside with a shell prompt, just like a miniature alphanumeric terminal. You can have several terminal windows running at the same time, each doing something different. To enter a Unix command or answer a prompt in a window, set the focus there and type. Programs in other windows will keep running; if they need input from you, they'll wait just as they would on a standard terminal.

Quite a few programs make terminal windows. One of the best-known programs is xterm. Others include GNOME Terminal and konsole. All perform the same basic job: they allow you to interact with Unix from a shell prompt.

Figure 2-2D and Figure 2-4 show a single terminal window with a shell prompt ($). If you enter a Unix command (such as date) at the prompt, it runs just as it would on a terminal that isn't under the X Window System.

You can also start other X-based window programs (sometimes called X clients) by entering the program's name at a shell prompt in any terminal window. Although you can start new programs (such as terminal windows, xcalc, and so on) from any open terminal window on your computer, we recommend starting them all from the first terminal window that you open. If you do that, and if your shell has job control (see Chapter 7), it's easy to find and control all the other programs and their windows.

Here's an example. To start the calculator called xcalc, enter this command from a terminal window:

$ xcalc &
[1] 12345
$

The shell will put the process in the background--so you get another shell prompt right away--and will print a process ID (PID) number, such as 12345. (Chapter 7 has more information on this subject.) If you forget to add the ampersand (&) at the end of the line, then kill (terminate) the xcalc program from the terminal window where you started it by typing your interrupt character (such as CTRL-C). You should get another shell prompt, where you can re-enter the xcalc command correctly.

The new window may be placed and get the focus automatically. Or, the window (or an outline of it) may "float" above the screen, following the pointer, until you point somewhere and click the first mouse button to place the window.

You can also start a new terminal window from an existing one. Just enter the program's name and an ampersand (for example, xterm &) at the shell prompt. Don't forget the ampersand.

The same method will start other X programs. (Later in this chapter, Section 2.8 lists some standard X programs.)

2.3.3. Window Manager Menus

Your window manager probably has one or more menus, buttons, and dialogs of its own. These let you control the way the window manager works, overall. They may also launch programs, open the help system, and do other useful things that don't apply to all programs and windows that are currently open (things you can't do with an individual program's own menus, that is). For instance, a window manager menu might let you set how many rows of program launching buttons are in the panel or the color of the frame around each window.

Different window managers have different ways to do these things. To find the menus on your window manager, read its documentation or experiment a bit. You might also find that pressing different mouse buttons will open different menus. You may need to hold down the button to keep a menu visible. Move your mouse pointer around to places shown in the following, then try your mouse buttons:

• The desktop (outside any of your open windows)

• An icon with a logo--for example, the KDE gear with a K over it or the GNOME footprint

• A blank part of some standard feature of your desktop--for instance, an empty part of the panel

• Any little feature that doesn't seem to apply to a particular program (that isn't a program icon and doesn't have the title of a program or open window)--for instance, the small triangle to the right of the pager shown in Figure 2-1

You probably can add commands to some menus, or more icons to a group of program-launching icons. You might add window manager operations or commands to open other windows. For example, a "New Window" menu item can open a new terminal window for you. A "Calculator" item could start xcalc. Different window managers have different ways to do this. Check your documentation. To add a command, you'll need to specify either the program name (such as xterm or mozilla) or the absolute pathname of its executable file (such as /usr/X11R6/bin/xterm). The absolute pathname varies system-to-system; you might find it using the command which or type from a shell prompt, like this:

$ type xterm
xterm is /usr/X11R6/bin/xterm
$ which xterm
/usr/X11R6/bin/xterm

2.3.3.1. Exercise: exploring your window system

Change to your home directory.	Enter cd.
Open two terminal windows.	Enter the program name and an ampersand (such as xterm &) twice, or select that item twice on a window manager menu.
Practice setting focus on both new windows and entering Unix commands in each.	Click on a window and/or move the pointer there. Enter who am i, etc.
Start a clock from one terminal window.	Enter xclock & or oclock &.
Start a calculator from one window and try it.	Enter xcalc &.
Change the working directory (see Section 3.1.6 in Chapter 3) in only one terminal window.	Enter cd /bin.
Check the working directory in both terminal windows.	Enter pwd in both windows.
Terminate xcalc.	Set the focus on the xcalc, and either type your interrupt character (such as CTRL-C) or click the close-box (often an X in the top-right corner of the window frame).